Kia Sedona: Lane Departure Warning System (LDWS) Unit Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the LDWS unit cover (A).

3.	Disconnect the LDWS unit connector (A).

Remove the LDWS unit after disengaging the mounting bracket (A).

When disengaging the mounting bracket, be careful not to be damaged it.

Installation

1.	Align LDWS unit with windshield bracket using forward edge point (A).

Engage snaps and pivot upward to lock point (B).

LDWS unit is fully assembled when a single click sound is heard.

3.	Connect the LDWS unit connector.

4.	Connect the negative (-) battery terminal.

Lane Departure Warning System (LDWS) Unit Components and Components Location

Components ...

Lighting System

...

Other Information:

Rear Console Cover Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protec ...

Manual climate control system
1. Turn the ignition switch to the ON position. 2. Turn the fan speed control knob to the OFF (0) position. 3. Turn the mode selection knob to the defrost position (). 4. Push the air intake cont ...

Kia Sedona: Lane Departure Warning System (LDWS) Unit Repair procedures

Lane Departure Warning System (LDWS) Unit Components and Components Location

Lighting System

Other Information:

Categories