Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp.
(Refer to Body Electrical - "Overhead Console Lamp") |
3. |
Remove the hands free mic (A) from the overhead console lamp loosening the mounting screws. |
4. |
Check the continuity of Mic between terminals. |
Components and Components Location
Component Location
1. Overdrive Clutch (OD/C)2. One way Clutch (OWC)3. Low & Reverse Brake (LR/B)4. Underdrive Brake (UD/B)5. 26 Brake(26/B)6. 35R Clutch (35R/C)7. Damper Clutch (D/C)
...
Front Seat Assembly Repair procedures
Replacement
1.
Open the front seat mounting bolt cap (A), then loosen the mounting bolts (B).
Tightening torque :
44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft)
[Front]
[Rear]
2.
Di ...