Kia Sedona: Front Seat Shield Outer Cover Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Outer Cover Components and Components Location

Front Seat Assembly Repair procedures

Replacement 1. Open the front seat mounting bolt cap (A), then loosen the mounting bolts (B). Tightening torque : 44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft) [Front] [Rear] 2. Di ...

Front Seat Shield Outer Cover Repair procedures

Replacement [Front seat shield front cover]     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the re ...

Other Information:

Ambient Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect ambient temperature sensor. 4. Check the resistance of the ...

Headlamp (bulb type) -high/low
1. Open the hood. 2. Remove the front cover(1) and headlamp assembly nuts(2). 3. Remove the headlamp assembly from the body of the vehicle 4. Remove the headlamp bulb cover by turning it counte ...