Component Location |
1. Front door window glass |
Starter Relay Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).
4.
Check for continuity between ...
Barometric Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]10.0 (0. ...