Kia Sedona: Front Door Outside Handle Repair procedures - Front Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Door Outside Handle Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Outside Handle Repair procedures

Replacement
1.
Remove the hole plug (A).
2.
After loosening the mounting bolt, remove the front door outside handle cover (B).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.
Remove the front door outside handle (A) by sliding it backward.

4.
Disconnect the front door outside handle connector (A).

5.
Install in the reverse order of removal.
   
•
Be sure to install the outside handle pad (A) between the outside handle and the door panel.

•
Make sure that the connectors are connected properly.
•
Make sure that the door locks/unlocks and opens/closes properly.
Front Door Outside Handle Components and Components Location
Component Location 1. Front door outside handle ...

Front Door Latch Components and Components Location
Component Location 1. Front door latch ...

Other Information:

Repair procedures
Inspection Inspection Item • Battery efficiency inspection • Battery voltage inspection • Charging voltage insptection • General inspection • ...

Anti-Pinch Strip Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the anti-pinch strip sensor connector (A). 4. R ...

Categories


Copyright © www.kisedona.com 2016-2025