The evaporator temperature sensor detects the evaporator core
temperature and interrupt compressor relay power in order to prevent
evaporator from freezing by excessive cooling.
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between terminals “1” and “2”.
2.
Inspect the voltage value to determine whether it is within speci ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistance between terminals “+” and “-” of the evaporator tempera ...
Other Information:
Press start button again (for smart key system)
This warning message illuminates if you can not operate the Engine Start/Stop
Button when there is a problem with the Engine Start/Stop Button system.
It means that you could start the engin ...
Overhead Console Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp (A) after loosening the screws.
3.
Disconnect the connector (A) from the overhead console lamp. ...