Kia Sedona: Components and Components Location - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Components and Components Location

Component Location Index
Engine Room

1. Ambient temperature Sensor
2. Receiver-drier
3. Condenser
4. Compressor
5. Discharge Hose
6. Service Port (Low Pressure)
7. Service Port (High Pressure)
8. A/C Pressure Transducer (APT)
9. Suction & Liquid Tube Assembly
10. Expansion Valve

Interior

1. Auto Defogging Sensor
2. Photo Sensor
3. Heater & A/C Control Unit (Manual)
4. Heater & A/C Control Unit (DATC)[AUDIO Type]
5. Heater & Blower Unit
6. Evaporator Temperature Sensor
7. Heater & A/C Control Unit (DATC)[AVN Type]

Repair procedures
Refrigerant Recovery Use only U.L.-listed service equipment that is certified to meet the requirements of SAE J2210 when removing HFC-134a (R-134a) from the air conditioning system. ...

Compressor oil Repair procedures
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (P ...

Other Information:

Filler-Neck Assembly Repair procedures
Removal 1. Open the fuel filler door and then remove the filler-neck mounting bolts (A). Filler-neck assembly mounting bolt: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Left the ...

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and veh ...

Categories


Copyright В© www.kisedona.com 2016-2025