Inspection |
1. |
The windshield deicer switch inputs can be checked using the GDS. |
2. |
To check the input value of windshield deicer switch, select option "Body Control Module". |
3. |
Select option "Current Data". |
4. |
To perform functional test on SJB outputs, select "Actuation Test". |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
Installation |
1. |
Install the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
2. |
Connect the negative (-) battery terminal. |
Repair procedures
Service Adjustment Procedure
Steering Wheel Play Inspection
1.
Turn the steering wheel so that the front wheels can face straight ahead.
2.
Measure the distance that the steering wheel ca ...
Turn signal lamp/Position lamp
1. Open the hood.
2. Remove the front cover(1) and headlamp assembly nuts(2).
3. Remove the headlamp assembly from the body of the vehicle
4. Remove the socket from the assembly by turning the so ...