Kia Sedona: Wheel Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Tires/Wheels / Wheel Repair procedures

Hub nut tightening sequence

Tighten the hub nuts as follows.

Tightening torque:

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

When using an impact gun, final tightening torque should be checked using a torque wrench.

Run out inspection

1.	Jack up the vehicle.

Measure the wheel Run-out by using a dial indicator as in the illustration below.

Run-out	Aluminum	Aluminum
Radial mm(in.)	0.3(0.0118)	0.7(0.028)
Lateral mm(in.)	0.3(0.0118)	1.1(0.043)

3.	If measured value exceeds the standard value, replace the wheel.

Tire Repair procedures

Tire Wear • Using tires and wheels of other than the recommended sizes can cause unusual handling characteristics and poor vehicle control, resulting in a ...

Tire Pressure Monitoring System

...

Other Information:

Instrument Cluster Schematic Diagrams
Circuit Diagram ...

Transaxle Shift Indicator
Automatic Transaxle Shift Indicator This indicator displays which automatic transaxle shift lever is selected. Park :P Reverse : R Neutral : N Drive :D Sports Mode : 1, 2, 3, 4, 5, 6 ...

Kia Sedona: Wheel Repair procedures

Tire Repair procedures

Tire Pressure Monitoring System

Other Information:

Categories