Removal |
1. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
3. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt") |
4. |
Remove the water pump pulley (A). |
5. |
Remove the water pump (A) and gaskets (B). |
Inspection |
1. |
Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. |
2. |
Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary. |
3. |
Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly.
|
Installation |
1. |
Install the water pump (A) with new gaskets (B).
|
2. |
Install the water pump pulley (A).
|
3. |
Install in the reverse order of removal. |
4. |
Fill the radiator with coolant and check for leaks.
(Refer to Cooling System - "Coolant") |
Description and Operation
Description
Exhaust emissions (CO, HC, NOx) are controlled by a
combination of engine modifications and the addition of special control
components.
Modifications to the combustion chamber, int ...
Emergency fuel filler lid release
If the fuel filler lid does not open using the remote fuel filler lid release,
you can open it manually by pulling the handle outward slightly.
CAUTION
Do not pull the handle excessively, ot ...