Inspection |
1. |
Check all the clamps for tightness and the connections for leakage. |
2. |
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation. |
1. |
Visually check that the fuel tank cap assembly and gasket (A) are not deformed or damaged. |
Water Jacket Seperator Repair procedures
Removal
1.
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket seperators (A).
Installation
1.
Install the ...
Cowl Side Trim Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...