Valve Clearance Inspection and Adjustment |
Inspect and adjust the valve clearance when the engine is
cold (Engine coolant temperature : 20°C [68°F]) and cylinder head is
installed on the cylinder block. |
1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover") |
2. |
Set No.1 cylinder to TDC/compression.
|
3. |
Inspect the valve clearance.
|
4. |
Adjust the intake and exhaust valve clearance.
|
Starter Specifications
Specification
Starter
ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm
...
Sunroof
Front
Rear
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control lever located on the overhead console.
The sunroof can only be opened, close ...