Removal |
1. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover"). |
2. |
Remove the ATF drain plug (A), allow the fluid to drain out and then reinstall the drain plug.
|
3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery") |
4. |
Remove the wiring bracket (A) and the air breather hose (B).
|
5. |
Lift the vehicle after loosening valve body cover upper bolts. |
6. |
Remove the valve body cover (A) by loosening bolts.
|
7. |
Remove the solenoid valve harness (A) and oil temperature sensor (B) after removing the bolts.
|
8. |
Remove the valve body assembly (A).
|
Installation |
1. |
Install in the reverse order of removal.
|
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system. If ...
Line Pressure Control Solenoid Vale Description and Operation
Description
•
Line pressure control solenoid valve is a Variable Force Solenoid (VFS) type.
•
When TCM supplies variable current to solenoid valve, line pressure is controlled ...