Pin | Description |
10 | CAN (High) |
27 | Ignition switch |
29 | Sports mode up switch |
35 | CAN (Low) |
44 | Inhibitor switch signal ''S1'' |
45 | Inhibitor switch signal ''S2'' |
46 | Inhibitor switch signal ''S3'' |
47 | Inhibitor switch signal ''S4'' |
54 | Sports mode down switch |
79 | Sports mode Select switch |
85 | Reverse lamp relay |
86 | P/N relay |
Pin | Description |
1 | Overdrive clutch control solenoid valve (VFS) |
3 | Input speed sensor signal |
4 | Output speed sensor signal |
26 | Torque converter control solenoid valve (VFS) |
27 | 35R Clutch control solenoid valve (VFS) |
28 | SS-A Solenoid valve (ON/OFF) |
29 | Input speed sensor power |
51 | Line pressure control solenoid valve (VFS) |
52 | Underdrive brake control solenoid valve (VFS) |
53 | SS-B Solenoid valve (ON/OFF) |
54 | Output speed sensor power |
55 | Oil temperature sensor (-) |
57 | Oil temperature sensor (+) |
76 | Solenoid valve power 1 |
77 | Solenoid valve power 2 |
78 | 26 Brake control solenoid valve (VFS) |
Pin No. | Signal | Condition | Type | Level |
29 | Sports mode up switch | Up ON | Input | 0V/Battery voltage level |
Other | 9V < Battery voltage level < 16V | |||
44 | Inhibitor switch signal "S1" | ON | Input | 9V < Battery voltage level < 16V |
OFF | 0V/Battery voltage level | |||
45 | Inhibitor switch signal "S2" | ON | Input | 9V < Battery voltage level < 16V |
OFF | 0V/Battery voltage level | |||
46 | Inhibitor switch signal "S3" | ON | Input | 9V < Battery voltage level < 16V |
OFF | 0V/Battery voltage level | |||
47 | Inhibitor switch signal "S4" | ON | Input | 9V < Battery voltage level < 16V |
OFF | 0V/Battery voltage level | |||
54 | Sports mode down switch | Down ON | Input | 0V/Battery voltage level |
Other | 9V < Battery voltage level < 16V | |||
79 | Sports mode select switch | Sport mode | Input | 0V/Battery voltage level |
Other | 9V < Battery voltage level < 16V | |||
85 | Rear lamp relay | R ON | Output | 0V/Battery voltage level |
Other | 9V < Battery voltage level < 16V | |||
86 | P/N relay | P-R change | Output | Min. Operation voltage: Battery voltage ≥ 6.0V |
Max. Operation voltage: Battery voltage ≤ 16.0V | ||||
P/N range position |
Pin No. | Signal | Condition | Type | Level |
1 | Overdrive clutch control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
Power supply : V_SOL1 | ||||
3 | Input speed sensor signal | High | Input | 0.7V/1.4V |
Low | ||||
4 | Output speed sensor signal | High | Input | 0.7V/1.4V |
Low | ||||
26 | Torque converter control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
27 | 35R clutch control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
28 | SS-A Solenoid valve (ON/OFF) | High | Output | 0V/Battery voltage level |
Low | 9V < Battery voltage level < 16V | |||
29 | Input speed sensor power | ON | Power | 0V/7.5V |
OFF | ||||
51 | Line pressure control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
52 | Underdrive brake control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
Power supply : V_SOL2 | ||||
53 | SS-B Solenoid valve (ON/OFF) | High | Output | 0V/Battery voltage level |
Low | 9V < Battery voltage level < 16V | |||
54 | Output speed sensor power | ON | Power | 0V/7.5V |
OFF | ||||
55 | Oil temperature sensor (-) |   | Ground | 0V |
76 | Solenoid valve power 1 | ON | Power | 0V/Battery voltage level |
OFF | 9V < Battery voltage level < 16V | |||
77 | Solenoid valve power 1 | ON | Power | 0V/Battery voltage level |
OFF | 9V < Battery voltage level < 16V | |||
78 | 26 brake control solenoid valve |   | Output | 0V/Battery voltage level |
9V < Battery voltage level < 16V | ||||
Power supply : V_SOL2 |
Circuit Diagram |
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Rear Door Power Window Regulator Repair procedures
Replacement
1.
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
2.
Loosen the mounting nut and remove the rear door power window regulator connector (A).
...