Removal |
Take care not to scratch the crash pad and related parts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Remove the BCM & Receiver unit (A) after loosening the nuts.
(Refer to Body Electrical System - "BCM (Body Control Module)") |
4. |
Replace the receiver, and then perform the learning process using a diagnostic instrument (GDS). |
Diagnostic Procedure Using a Diagnostic Instrument |
1. |
Connect the diagnostic instrument to the self-diagnostic
connector (16-pin) beneath the crash pad on the side of driver''s seat,
and then turn on the ignition to activate the diagnostic instrument. |
2. |
In the GDS Vehicle Type Selection menu, select "Vehicle Type" and "TPMS" System, and then opt for "OK." |
Rear Door Trim Components and Components Location
Component Location
1. Rear door trim
...
Specifications
Tightening Torque
ItemN.mkgf.mlb-ftPassenger airbag(PAB)7.8 ~ 11.80.8 ~ 1.25.8 ~ 8.7Curtain airbag (CAB)Bolt7.8 ~ 10.80.8 ~ 1.25.8 ~ 8.7Nut3.9 ~ 5.90.4 ~ 0.62.9 ~ 4.3Seat Belt Anchor Bolt39.2 ~ 5 ...