Kia Sedona: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa (kgf/cm², psi)
"9.81 ~ 500.14
(0.1 ~ 5.1, 1.42 ~ 72.54)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

Output Speed Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Components and Components Location
Component Location 1. Torque Converter Control Solenoid Valve (T/CON_VFS) ...

Other Information:

228,000 km (142,500 miles) or 114 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

Leg support (2nd row seat for SXL package)
To use the leg support : 1. Pull the leg support lever up and hold it. 2. Adjust the angle and length of the leg support while holding the leg support. When using the leg rest, move the seat to ...

Categories


Copyright © www.kisedona.com 2016-2024