Kia Sedona: To set vehicle to vehicle distance - Vehicle to vehicle distance setting (SCC) - Smart cruise control system (SCC) - Driving your vehicle - Kia Sedona YP Owners ManualKia Sedona: To set vehicle to vehicle distance

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Driving your vehicle / Smart cruise control system (SCC) / Vehicle to vehicle distance setting (SCC) / To set vehicle to vehicle distance

This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal.

The vehicle to vehicle distance will automatically activate when the SCC is on.

Select the appropriate distance according to road conditions and vehicle speed.

Each time the button is pressed, the vehicle to vehicle distance changes as follows:

For example, if you drive at 90 km/h (56 mph ), the distance is maintained as follows;

Distance 4 - approximately 52.5 m (172 feet )

Distance 3 - approximately 40 m (130 feet )

Distance 2 - approximately 32.5 m (106 feet )

Distance 1 - approximately 25 m (82 feet )

✽ NOTICE

The 'Distance 4' is always set when the system is used for the first time after starting the engine.

WARNING - Following distance

If the vehicle ahead (vehicle speed: less than 30 km/h (20 mph)) moves to the next lane, the warning chime will sound and a message will appear.

If a vehicle enters into your lane moving less than the designated speed, you can adjust your vehicle speed by depressing the brake pedal.

Vehicle to vehicle distance setting (SCC)
...

Sensor to detect distance to the vehicle ahead
The sensor detects distance to the vehicle ahead. If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly. Always keep the s ...

Other Information:

Towing service
If emergency towing is necessary, we recommend having it done by an authorized Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage ...

Rear Glass Defogger Printed Heater Repair procedures
Inspection     Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil a ...

Categories


Copyright В© www.kisedona.com 2016-2024