Inspection |
1. |
Check the tire pressure.
17(inch) : 241+7kPa (35 + 1.0 psi)
18(inch) : 241+7kPa (35 + 1.0 psi)
19(inch) : 241+7kPa (35 + 1.0 psi) |
1. |
Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability. |
2. |
If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again. |
3. |
If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test. |
4. |
If the steering continues to pull to the opposite side, replace the front wheels with new ones. |
|
1. |
Measure the tread depth of the tires.
|
2. |
If the remaining tread depth (A) is less than the limit, replace the tire.
|
External AMP Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly")
3.
Remove the body control module.
(Refer to " ...
Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3 N.m (8. ...