Removal |
Removal of the thermostat may have an adverse effect, causing
a reduction in cooling efficiency. Do not remove the thermostat, even
if the engine tends to overheat. |
1. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
Drain engine coolant.
(Refer to Cooling System - "Coolant") |
3. |
Disconnect the radiator lower hose (A). |
4. |
Remove the water inlet fitting (A) and the thermostat (B).
|
5. |
Install in the reverse order of removal. |
Inspection |
1. |
Immerse thermostat in water heated to over 95°C (203°F), then heat for at least 3 minutes to check valve lift.
|
2. |
Check the valve opening temperature.
If the valve opening temperature is not as specified, replace the thermostat. |
3. |
Check the valve lift.
If the valve lift is not as specified, replace the thermostat. |
Service Interval
Type A
Type B, C
Service in
It calculates and displays when you need a scheduled maintenance service (mileage
or days).
If the remaining mileage or time reaches 1,500 km. (900 mi) or 30 days ...
Crankshaft Position Sensor (CKPS) Specifications
Specification
ItemSpecificationCoil Resistance (Ω)500 ~ 620 [20°C(68°F)]
...