Kia Sedona: Tail Gate Lift Repair procedures - Tail Gate - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Tail Gate Lift Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Lift Repair procedures

Replacement
   
Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.
1.
Remove the tail gate lifter (A) after loosening the bolts and socket clip and bolts (B).

Tightening torque:
6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

   
•
Power tail gate type.
(Refer to Body Eletrical System - "PTG Spindle")
•
Using a flat head screwdriver (A), remove the clip (B).

2.
Install in the reverse order of removal.
   
Make sure that the tail gate locks and opens properly and locks securely.
Tail Gate Back Panel Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Tail Gate Weatherstrip Repair procedures
Replacement 1. Remove the rear transverse trim. (Refer to Interior Trim - "Rear Transverse Trim") 2. Remove the tail gate weatherstrip (A).     Do not apply sealant ...

Other Information:

Seat Heater Switch Components and Components Location
Components 1. Driver seat heater switch2. Assist seat heater switch 1. Second row seat heater switch [LH]2. Second row seat heater switch [RH] ...

From the front seat
1. Set the rear climate control selection (REAR ON) button in the front climate control panel to the ON position. 2. Set the rear fan speed control knob in the front climate control panel to the ...

Categories


Copyright © www.kisedona.com 2016-2024