Kia Sedona: Tail Gate Back Panel Repair procedures - Tail Gate - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Tail Gate Back Panel Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Back Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
(Refer to Tail Gate - "Tail Gate Trim")
2.
Disconnect the license lamp connector and back view camera connector (A).

3.
Loosen the tail gate back panel mounting nuts (A).

4.
Using a screwdriver or remover, remove the tail gate back panel (A).

5.
Install in the reverse order of removal.
   
•
Make sure that the connectors are plugged in properly.
•
Replace any damaged clips.
Tail Gate Back Panel Components and Components Location
Component Location 1. Tail gate back panel ...

Tail Gate Lift Repair procedures
Replacement     Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. ...

Other Information:

Clock
Hour (1) Pressing the H button will advance the time displayed by one hour. Minute (2) Pressing the M button will advance the time displayed by one minute. To change the 24 hour format to the 12 ...

To turn cruise control off, do one of the following
Press the CRUISE button (the CRUISE indicator light in the instrument cluster will go off). Turn the ignition off. Both of these actions will cancel the cruise control operation. If you w ...

Categories


Copyright © www.kisedona.com 2016-2024