Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly (A) after loosening 2 screws. |
3. |
Check for continuity between the terminals. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
3. |
Remove the room lamp (A) after loosening the mounting screws. |
4. |
Check for continuity between the terminals. |
Heater & A/C Control Unit (Rear) Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose & nolzzle4. Washer reservoir5. Washer motor6. Washer fluid level sensor7. Wiper mot ...