Kia Sedona: Steering Gear Rack, Linkage and Boots Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Steering Gear Rack, Linkage and Boots Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Maintenance / Chassis / Steering Gear Rack, Linkage and Boots Repair procedures

Inspection
1.
Check the steering wheel free road.
(1)
Turn the steering wheel so that the front wheels are facing straight ahead.
(2)
Measure the distance where the steering wheel can be turned without moving the front wheels.

Standard value: 30mm (1.18in.) or less

(3)
If the play exceeds standard value, inspect the steering column, shaft, and linkages.

2.
Check the steering linkage for looseness or damage.
(1)
Check that the dust parking and cap are not damaged.
(2)
Check that the Bellows bands are not loose.
(3)
Check that the steering gear box is not damaged.
(4)
Check that the column and shaft are properly connected to the steering gear box.
Power Steering Pump, Belt and Hoses Repair procedures
Inspection Power steering pump and hoses Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately. Power ste ...

Suspension Ball Joints Repair procedures
Inspection Visually check to be sure that there are no flaws and cracks that may cause injury. ...

Other Information:

Rear Alignment Repair procedures
Rear wheel alignment     When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always position the vehicle on ...

Ignition Coil Schematic Diagrams
Circuit Diagram ...

Categories


Copyright В© www.kisedona.com 2016-2024