Kia Sedona: Specifications - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
â–· Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
â–· Type: Piezo-Resistive Pressure Sensor
â–· Specification
Pressure (kPa)
Output Voltage (V)
-6.67
0.5
0
2.5
+6.67
4.5

Canister Close Valve (CCV)
â–· Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) Valve
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
Canister mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Fuel tank air filter mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3

Emission Control System
...

Components and Components Location
Components Location 1. PCV Valve2. Canister3. Purge Control Solenoid Valve (PCSV)4. Fuel Tank Pressure Sensor (FTPS)5. Canister Close Valve (CCV)6. Fuel Level Sender (FLS)7. Fuel Tank Air Filt ...

Other Information:

Rear Evaporator Core Repair procedures
Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2. Remove the rear heater & A/C lower case after loosening the screws. 3. Remove the ...

Front Bumper Cover Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Categories


Copyright © www.kisedona.com 2016-2024