Specifications |
Item | Specification | |
Type | Motor Driven Power Steering | |
Hydraulic Power Steering System | ||
Steering gear | Type | Rack & Pinion |
Rack stroke | 168mm | |
Steering angle(Max.) | Inner | 41.91° |
Outer | 32.84° | |
Power steering pump | Type | Vane |
Relief pressure | 100 ~ 105 kgf/cm² (1422 ~ 1493 psi) | |
Power steering oil | PSF-3 or PSF-4 (Power Steering Fluid, MS517-16) |
Item | Tightening torque (kgf.m) | ||
Nm | kgf.m | lb-ft | |
Tire wheel hub nuts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Steering wheel lock nut | 39.2 ~ 49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
Steering column assembly to Universal joint | 49.0 ~ 58.8 | 5.0 ~ 6.0 | 36.2 ~ 43.4 |
Steering column mounting bolts | 44.1 ~ 49.0 | 4.5 ~ 5.0 | 32.5 ~ 36.2 |
Steering column mounting nuts | 24.5 ~ 29.4 | 2.5 ~ 3.0 | 18.1 ~ 21.7 |
Universal joint to gear box | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
Steering gear box to sub freame | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Heat protector nut and bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Pressure hose bracket bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Gear box fit tube | 11.8 ~ 17.7 | 1.2 ~ 1.8 | 8.7 ~ 13.0 |
Pressure hose | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.8 ~ 47.0 |
Rear Power Mosfet Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of the blower motor.
3.
Operate the control switch to raise the voltage up to high ...
Drive Plate Repair procedures
Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the adapter plate (A) and the drive plate (B).
Tighten ...