Kia Sedona: Smart Tailgate Unit Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Smart Tailgate Unit Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Smart Tailgate Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the smart tailgate unit connector (A).

4.
Remove the smart tailgate unit (A) after loosening the nuts.

Installation
1.
Install the smart tailgate unit.
2.
Connect the smart tailgate unit connector.
3.
Install the luggage side trim [RH].
4.
Connect the negative (-) battery terminal.
Smart Tailgate Unit Schematic Diagrams
Circuit Diagram ...

Smart Tailgate Latch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the smart tailgate latch and PCU assembly connector ...

Other Information:

ACC(Accessory)
Amber Press the ENGINE START/STOP button while it is in the OFF position without depressing the brake pedal. If the ENGINE START/STOP button is in the ACC position for more than 1 hour, the bu ...

LCD Display Control
Type A The LCD display modes can be changed by using the control buttons on the steering wheel. [Type A] (1) ▲ / ▼ : TRIP scroll switch for changing trip modes (2) RESET : RESET bu ...

Categories


Copyright В© www.kisedona.com 2016-2024