Kia Sedona: Smart Tailgate Latch Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Smart Tailgate Latch Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Smart Tailgate Latch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim")
3.
Disconnect the smart tailgate latch and PCU assembly connector (A).

4.
Loosen the smart tailgate latch mounting bolts.
5.
Remove the smart tailgate latch and PCU assembly (A) after loosening the nuts.

Installation
1.
Install the smart tailgate latch and PCU assembly.
2.
Connect the smart tailgate latch and PCU assembly connector.
3.
Install the tail gate trim.
4.
Connect the negative (-) battery terminal.
Inspection
Inspection of the Smart Tailgate using GDS
1.
Check up through GDS analyzing device, the failure code, monitoring on entered value, and by forcefully operating actuator and self diagnosis, failed area can be detected promptly.
2.
Select the vehicle and menu to analyze the Smart Tailgate module.
3.
Select the "STM" to check the DTC of the power trunk module.
4.
Select the "Service Data" to see the current status in accordance with the input/output value. Offer status of the each switch and sensor.

Smart Tailgate Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim [RH]. (Refer to Body - "Luggage Side Trim") 3. Disconnect the smart tailgate unit connector (A). ...

Anti-Pinch Strip Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the anti-pinch strip sensor connector (A). 4. R ...

Other Information:

Air intake control
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position With the reci ...

Battery Repair procedures
Inspection Battery Voltage and Status Check the battery voltage and status using the battery tester. Battery Terminal 1. Move back and forth to check that the battery terminals (A) are loose or ...

Categories


Copyright В© www.kisedona.com 2016-2024