Smart Key |
1. |
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, and then turn the power on
GDS. |
2. |
Select the vehicle model and then perform "Smart key code saving". |
3. |
After selecting "Smart Key Code Saving" menu, push "Enter" key, then the screen will be shown as below. |
4. |
After saving the smart key code, press "OK" button. |
5. |
Enter the "Pin code" for the first key teaching. |
6. |
Press the SSB with smart key within 5 sec after pressing "OK". |
7. |
Confirm the message "First key teaching completed". |
8. |
Press the SSB with smart key within 5 sec after pressing "OK". |
9. |
Confirm the message "Second key teaching completed". |
10. |
Then the screen will be shown as below when smart key saving process is completed. |
Normal maintenance schedule
The following maintenance services must be performed to ensure good emission
control and performance. Keep receipts for all vehicle emission services to protect
your warranty. Where both mileage a ...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
A wheel that is not the correct size may adv ...