Kia Sedona: Smart key Diagnostic Repair procedures - Smart key System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Smart key Diagnostic Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Smart key System / Smart key Diagnostic Repair procedures

Inspection
Self Diagnosis With Scan Tool
Using the GDS, it can quickly diagnose defects of SMART KEY system. GDS can operate actuator forcefully, monitor input/output values and perform self diagnosis.
The following three features will be major problem in SMART KEY system.
1.
Problem in SMART KEY unit input.
2.
Problem in SMART KEY unit.
3.
Problem in SMART KEY unit output.
So, the following three diagnosis operations will be the major problem solution process.
1.
SMART KEY unit Input problem : switch diagnosis
2.
SMART KEY unit problem : communication diagnosis
3.
SMART KEY unit Output problem : antenna and switch output diagnosis
Switch Diagnosis
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
2.
Select the vehicle model and then SMART KEY system.
3.
Select the "SMART KEY unit".
4.
After IG ON, select the "Current data".

5.
You can see the situation of each switch on scanner after connecting the "current data" process.
Display
Description
FL Toggle SW
ON : Push button is ON in the driver door handle.
FR Toggle SW
ON : Push button is ON in the assist door handle.
Tailgate open SW
ON : Tailgate button is ON.
Gear P Position
ON : Shift lever is P position.
IGN 1
ON : IGN switch is IG position.
ACC
ON : IGN switch is ACC position.
Brake SW
ON : Brake switch is ON.

Communication Diagnosis With GDS (Self Diagnosis)
1.
Communication diagnosis checks for normal operation in each component.
2.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
3.
After IG ON, select the "DTC".

Antenna Actuation Diagnosis
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IG ON, select the "Actuation Test".

3.
Set the smart key near the corresponding antenna and operate it using GDS.
4.
If the LED of smart key is blinking, the smart key is normal.
5.
If the LED of smart key is not blinking, check the voltage of smart key battery.
6.
Antenna actuation
–
INTERIOR Antenna 1
–
INTERIOR Antenna 2
–
Trunk antenna
–
BUMPER/ Trunk Antenna
–
DRV_DR Antenna
–
AST_DR Antenna
Antenna Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
Select the "Antenna Status Check".

3.
After IG ON, select the "Antenna Status Check".

4.
Set the smart key near the corresponding antenna and operate it using GDS.

5.
If the smart key operates normally, it means that the corresponding antenna, smart key (transmission & reception) and exterior receiver are also normal.
6.
Antenna status
–
INTERIOR Antenna 1
–
INTERIOR Antenna 2
–
INTERIOR Antenna 3
–
BUMPER/ Trunk Antenna
–
DRV_DR Antenna
–
AST_DR Antenna
FOB Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IG ON, select the "FOB KEY STATUS INFO".

Smart Key Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IG ON, select the "SMK STATUS INFO".

Neutralization Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IG ON, select the "Neutralization mode".

3.
Select the "ECM Neutralization" or "SMK Neutralization".

Description and Operation
Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is n ...

Smart key Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, and then turn the power on GDS. 2. Select the ve ...

Other Information:

Rear parking assist system
The rear parking assist system assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 47 in. (120 cm) behind the vehicle. This system ...

Blind Spot Detection Unit Components and Components Location
Component ...

Categories


Copyright © www.kisedona.com 2016-2024