Kia Sedona: Side Impact Sensor (SIS) Description and Operation
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensors (P-SIS), installed at each center of front door modules
(LH and RH), two SIS, installed at each center of nearby pillars (LH and
RH), and two rear SIS, installed in the rear pillars (LH and RH).
Pressure Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM determines the deployment of airbag and the time of
deployment based on the collision signal from the SIS at the time of
collision.
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front i ...
Other Information:
Rear window wiper and washer switch
The rear window wiper and washer switch is located at the end of the wiper and
washer switch lever. Turn the switch to the desired position to operate the rear
wiper and washer.
HI : Continuous ...
Front Driveshaft Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to dam ...