Removal |
1. |
Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work. |
2. |
Remove the front seat assembly.
(Refer to Body - "Front seat assembly") |
3. |
Remove the seat back assembly.
|
Installation |
When installing the harness wires, be sure that they are not pinched or interfering with other parts. |
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
3. |
Install the new seat back assembly. |
4. |
Install the front seat assembly.
(Refer to Body - "Front seat assembly") |
5. |
Fully recline and slide the front seat forward, and make sure
that the harness wires are not pinched or interfering with other parts. |
6. |
Reconnect the battery negative cable. |
7. |
After installing the side airbag (SAB), confirm proper system operation:
|
Auto Defogging Sensor (DATC only) Repair procedures
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging se ...
Specifications
Specifications
ItemSpecificationTypeMotor Driven Power SteeringHydraulic Power Steering SystemSteering gearTypeRack & Pinion Rack stroke168mmSteering angle(Max.)Inner41.91°Outer32.84°P ...