Kia Sedona: Accelerator Position Sensor (APS) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Description and Operation
| Description |
Accelerator Position Sensor (APS), installed on the
accelerator pedal module, detects the rotation angle of the accelerator
pedal. The APS, one of the most important sensors in engine control
system, consists of two sensors each equipped with individual sensor
power and ground lines. The second sensor monitors the first sensor and
its output voltage is half of the first one. If the ratio of the sensor 1
and 2 is out of the range (approximately 1/2), the diagnostic system
judges that it is abnormal.
Accelerator Position Sensor (APS) Specifications
Specification
AcceleratorPositionOutput Voltage (V) [Ref=5V]APS1APS2C.T0.7 ~ 0.80.29 ~ 0.46W.O.T3.85 ~ 4.351.93 ~ 2.18
...
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
Other Information:
Center Fascia Panel Repair procedures
Replacement
[Center fascia upper panel]
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wra ...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024