Kia Sedona: Heated Oxygen Sensor (HO2S) Troubleshooting

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) Troubleshooting

Heated Oxygen Sensor (HO2S) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Rail Pressure Sensor (RPS) Specifications

Specification Pressure [MPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]0 (0, 0)0.510 (102, 1450)2.520 (204, 2900)4.5 ...

Other Information:

Power Door Lock Switch Repair procedures
Inspection Diagnosis With GDS 1. The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following in ...

Components and Components Location
Components     1) SVM unit basically uses C-CAN signal only to communicate about the vehicle''s condition. • Steering wheel angle sensor : C-CAN • Veh ...