Kia Sedona: Camshaft Position Sensor (CMPS) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS) Description and Operation
| Description |
Camshaft Position Sensor (CMPS), also known as a hall sensor, detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and
detects the piston position of each cylinder which the CKPS can''t
detect.
The two CMPS are installed on engine head cover of bank 1 and
2 respectively and uses a target wheel installed on the camshaft. The
Cam Position sensor is a hall-effect type sensor. As the target wheel
passes the Hall sensor, the magnetic field changes in the sensor. The
sensor then switches a signal which creates a square wave.
Camshaft Position Sensor (CMPS) Specifications
Specification
ItemSpecification (V) [Ref=5V]Output Voltage (V)High: 5.0VLow: 0.7V
...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...
Other Information:
Antenna Repair procedures
Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable.
3.
Check for continuity between the ...
Rear Door Belt Outside Weatherstrip Repair procedures
Replacement
1.
Pull down rear door window glass by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the rear door belt outside weatherstrip (A).
3.
In ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024