Inspection |
1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) terminal. |
2. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner") |
3. |
Remove the battery tray.
(Refer to Engine Electrical System - "battery") |
4. |
Disconnect the crankshaft position sensor connector (A). |
5. |
Remove the mounting bolt (B), and then vertically remove the sensor from the transaxle housing. |
Installation |
|
1. |
Install in the reverse order of removal.
|
Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this ...
Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle
...