Inspection |
1. |
Connect the GDS to the Data Link Connector (DLC). |
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) terminal. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the mounting bolt (B), and then vertically remove the sensor from the surge tank. |
Installation |
|
1. |
Install in the reverse order of removal.
|
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system. If ...
Speakers Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...