Kia Sedona: Fuel Tank Air Filter Repair procedures - Evaporative Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Fuel Tank Air Filter Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Tank Air Filter Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Lift the vehicle.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve.
5.
Remove the canister close valve (C).

6.
Remove th fuel tank air filter (B) after loosening the mounting bolts (A).

Fuel tank air filter mounting bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Installation
1.
Install in the reverse order of removal.
Fuel Filler Cap Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap ...

Exhaust Emission Control System
...

Other Information:

Climate information screen selection (for Type B)
Press the climate information screen selection button to display climate information on the screen. ...

Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling syst ...

Categories


Copyright В© www.kisedona.com 2016-2024