Kia Sedona: Fuel Filler Cap Description and Operation - Evaporative Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Fuel Filler Cap Description and Operation

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Filler Cap Description and Operation

Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

1. Cover
2. Torsion spring
3. Retainer
4. Gasket seal
5. Spring
6. Plate seal
7. Vacuum valve
8. Spring

Canister Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuel tank. (Refer to Engine Control / Fuel System - "Fuel Tank") 3. Disconnect the ...

Fuel Tank Air Filter Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift the vehicle. 3. Disconnect the canister close valve connector (A). 4. Disconnect th ...

Other Information:

Specifications
Specifications ItemSpecificationFront/Rear parking assist system control unitRated voltageDC 12VOperation range40~120 cm (15.7~47.2 in)Operation voltageDC 9V~16VOperation currentMax. 300 mAOperat ...

Outside thermometer
The current outside temperature is displayed in 1 ...

Categories


Copyright В© www.kisedona.com 2016-2024