Kia Sedona: Spark Plug Specifications - Ignition System - Engine Electrical System - Kia Sedona YP Service ManualKia Sedona: Spark Plug Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Electrical System / Ignition System / Spark Plug Specifications

Specification
Item
Specification
Type
SILZKR7B11
Gap
1.0 ~ 1.1 mm
(0.0394 ~ 0.0433 in.)
Insulation resistance (MΩ)
10 or more

Ignition Coil Repair procedures
Removal Ignition coil (Cylinder #1) [Bank 1] 1. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 2. Disconnect the Ignition coil connector (A). 3. Remove the i ...

Spark Plug Description and Operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

Other Information:

Immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition key ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow down when ...

Categories


Copyright В© www.kisedona.com 2016-2024