Removal |
1. |
Disconnect the battery negative (-) terminal. |
2. |
Remove the cooling fan.
(Refer to Engine Mechanical System - "Cooling Fan") |
3. |
Lift the vehicle. |
4. |
Remove the engine room RH side cover.
(Refer to Engine Mechanical System - Engine Room Under Cover - Repair procedures - "Engine Room Side Cover") |
5. |
To release the auto tension pully (A), turn the drive belt tensioner counterclockwise. |
6. |
Remove the drive belt (A). |
7. |
Disconnect the alternator connector (A). |
8. |
Disconnect the alternator cable (A) from the ''B'' terminal.
|
9. |
Remove the alternator (B) after loosening the mounting bolts (A).
|
Installation |
1. |
Install in the reverse order of removal. |
2. |
Install the drive belt.
(Refer to Engine Mechanical System - "Drive Belt") |
Armed stage
Park the vehicle and stop the engine. Arm the system as described below.
1. Remove the ignition key from the ignition switch and exit the vehicle.
2. Make sure that all doors (and tailgate) and engi ...
Components and Components Location
Component Location
1. Drive power window switch2. Passenger power window switch3. Front window motor4. Rear window motor5. Rear window switch
...