Replacement |
1. |
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley") |
2. |
Remove the front oil seal (A). |
3. |
Using SST (09231-3C100), install a new front oil seal.
|
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise that can cause engine damage. Two Knock Sensors (KS)
are installed inside the V-valley of the cylinder bloc ...
Camshaft Position Sensor (CMPS) Specifications
Specification
ItemSpecification (V) [Ref=5V]Output Voltage (V)High: 5.0VLow: 0.7V
...