Kia Optima Manuals

Kia Sedona: Drive Belt Tensioner Repair procedures - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Drive Belt Tensioner Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures

Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3 N.m (8.3 ~ 8.7 kgf.m, 60.0 ~ 62.9 lb-ft)
Bolt (C) :
17.7 ~ 21.6 N.m (1.8 ~ 2.2 kgf.m, 13.0 ~ 15.9 lb-ft)

3.
Install in the reverse order of removal.
Inspection
Check the belt tensioner for excessive dust, crack, and damage. Replace if necessary.
Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

Crankshaft Damper Pulley Components and Components Location
Components 1. Crankshaft damper pulley ...

Other Information:

Exterior care
Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. ...

Emergency Fastening Device (EFD) Components and Components Location
Components ...

Categories


Copyright В© www.kisedona.com 2016-2024