Removal and Installation |
1. |
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
To release the tension, turn the drive belt tensioner counterclockwise and then remove the drive belt (A).
[HPS]
[MDPS]
|
3. |
Install in the reverse order of removal. |
Inspection |
1. |
Check belt for maintenance and V-ripped part for abnormal wear. Replace if necessary.
|
2. |
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
|
Components and Components Location
Components
1. Front door inside handle cover2. Front door body side weatherstrip3. Front door side weatherstrip4. Front door quadrant inner cover5. Front door pull cap6. Front door belt inside w ...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
Do not place objects in the rear seat or cargo area which would in ...