Removal and Installation |
1. |
Drain engine oil.
(Refer to Lubrication System - "Engine Oil") |
2. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
3. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
4. |
Remove the oil pump chain cover (A).
|
5. |
Remove the bolt (A) and then separate the chain with sprocket from the oil pump.
|
6. |
Remove the oil pump (A).
|
7. |
Install in the reverse order of removal. |
8. |
After assembly, wait for at least 30 minutes before filling the engine with oil. |
Blind Spot Detection Unit Schematic Diagrams
Circuit Diagram
...
Rheostat Schematic Diagrams
Circuit Diagram
...