Removal |
1. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
Drain the engine oil.
(Refer to Lubrication System - "Engine Oil") |
3. |
Remove the lower oil pan (A).
Insert the blade of SST (09215-3C000) between the upper oil
pan and lower oil pan. Cut off applied sealer and remove the lower oil
pan.
|
1. |
Remove the engine assembly from the vehicle.
(Refer to Engine And Transaxle Assembly - "Engine And Transaxle Assembly") |
2. |
Attach the engine to engine stand for disassembly. |
3. |
Remove the timing chain.
(Refer to Timing System - "Timing Chain") |
4. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
5. |
Remove the oil pump.
(Refer to Lubrication System - "Oil Pump") |
6. |
Remove the LH/RH exhaust manifold stays.
(Refer to Intake And Exhaust System - "Exhaust Manifold") |
7. |
Remove the upper oil pan (A).
Insert the blade of SST (09215-3C000) between the upper oil
pan and cylinder block. Cut off applied sealer and remove the upper oil
pan. |
Installation |
1. |
Install the lower oil pan (A).
|
2. |
After assembly, wait for at least 30 minutes before filling the engine with oil. |
3. |
Install the other parts in the reverse order of removal. |
1. |
Install the upper oil pan.
|
2. |
Install the other parts in the reverse order of removal. |
Compressor Description and Operation
Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the engine.
The compressor changes low pressure and low tempera ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention. ...