Removal and Installation |
1. |
Disconnect the battery "-" terminal. |
2. |
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover") |
3. |
Disconnect the VIS actuator hose (A). |
4. |
Remove the VIS actuator (B).
|
5. |
Install in the reverse order of removal. |
1. |
Disconnect the battery "-" terminal. |
2. |
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover") |
3. |
Disconnect the VIS actuator hose (A). |
4. |
Remove the VIS actuator (B).
|
5. |
Install in the reverse order of removal. |
Suspension Ball Joints Repair procedures
Inspection
Visually check to be sure that there are no flaws and cracks that may cause injury. ...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09880-4F000Hog ring clip installerHog ring clip installation
...