Removal and Installation |
1. |
Disconnect the battery negative terminal. |
2. |
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover") |
3. |
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") |
4. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Muffler") |
5. |
Remove the oil level gauge.
(Refer to Lubrication System - "Oil Level Gauge & Pipe") |
6. |
Disconnect the LH front oxygen sensor (HO2S) connector (A). |
7. |
Remove the LH exhaust manifold heat protector (A).
|
8. |
Remove the LH exhaust manifolds stay (A), and then remove the LH exhaust manifold (B) and gasket.
|
9. |
Install in the reverse order of removal.
|
1. |
Disconnect the battery negative terminal. |
2. |
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover") |
3. |
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") |
4. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Muffler") |
5. |
Disconnect the RH front oxygen sensor (HO2S) connector (A). |
6. |
Remove the RH exhaust manifold heat protector (A).
|
7. |
Remove the oxygen sensor (HO2S) (A). |
8. |
Remove the RH exhaust manifolds stay (B), and then remove the RH exhaust manifold (C) and gasket.
|
9. |
Install in the reverse order of removal.
|
Sunroof Deflector Repair procedures
Replacement
1.
Completely open the sunroof glass (A) by pressing the sunroof switch.
2.
Loosen the sunroof deflector mounting screws.
3.
Remove the sunroof deflector (A).
4.
Install i ...
Components and Components Location
Components Location
1. Automatic transaxle assembly2. Valve body assembly 3. Oil pump assembly
...