Kia Optima Manuals

Kia Sedona: Engine Room Under Cover Repair procedures - Engine And Transaxle Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Engine Room Under Cover Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Room Under Cover Repair procedures

Removal
Engine Room Front Under Cover
1.
Remove the engine room front under cover (A).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room front under cover.
2.
Remove the engine room side cover (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.0 ~ 8.0 lb-ft)
RH

RH

3.
Install in the reverse order of removal.
Engine Room Under Cover Components and Components Location
Components 1. Engine room RH side cover2. Engine room LH side cover3. Engine room front under cover ...

Engine Mounting Components and Components Location
Components 1.Engine mounting support bracket2.Engine mounting bracket3.Transaxle mounting bracket4.Roll rod bracket ...

Other Information:

Transmitter precautions
The transmitter will not work if any of following occur : - The ignition key is in the ignition switch. - You exceed the operating distance limit (about 10 m [30 feet]). - The battery in the t ...

Field Effect Transistor (DATC) Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Operate the control switch to raise the voltage up to high ...

Categories


Copyright В© www.kisedona.com 2016-2024