Removal |
1. |
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head") |
2. |
Remove the water jacket seperators (A). |
Installation |
1. |
Install the #1, #2 cylinder bore water jacket seperators (A).
|
2. |
Install the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head") |
Luggage Room Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver.
3.
Remove the luggage room lamp (A ...
Walk-in seat (2nd row seat)
To get in or out from the 3rd row seat,
1. Lift the armrest up and lower the head rest to the lowest position (if necessary).
2. Pull up the walk-in lever (1) or pull the walk-in strap (2) on the ...