Compression Pressure Inspection |
If there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. |
1. |
Warm up the engine to the normal operating temperature [80-95°C (176-203°F)]. |
2. |
Remove the surge tank.
(Refer to Intake And Exhaust System - "Surge Tank") |
3. |
Remove the ignition coils.
(Refer to Engine Electrical System - "Ignition Coil") |
4. |
Remove the spark plugs.
(Refer to Engine Electrical System - "Spark Plug") |
5. |
Check cylinder compression pressure.
|
6. |
Reinstall the spark plugs.
(Refer to Engine Electrical System - "Spark Plug") |
7. |
Install the ignition coils and ignition connectors.
(Refer to Engine Electrical System - "Ignition Coil") |
8. |
Install the surge tank.
(Refer to Intake And Exhaust System - "Surge Tank") |
Shift Cable Components and Components Location
Components
1. Shift lever assembly2. Shift cable assembly3. Shift cable retainer
...
Components and Components Location
Components
1. Rear door parting weatherstrip2. Rear door side weatherstrip3. Rear door inside handle cover4. Rear door trim5. Rear door belt inside weatherstrip6. Rear door upper opening weather ...